Presonus Studiolive 16R Rack Mixer, a perfect partner for your StudioLive Series III console/recorder.
Serves as either a simple stage box or a combination stage box and monitor mixer.
Connect your StudioLive 16R to a Series III front-of-house console with one lightweight CAT5e or CAT6 Ethernet cable.
It not only serves as an excellent networked stage box but also a full-blown monitor mixer, with far more processing and mixing power than any mixer in its class.
The StudioLive 16R Series III rack mixer is a perfect partner for your StudioLive Series III console/recorder, serving as either a simple stage box or a combination stage box and monitor mixer.
Since Series III rack mixers and consoles can network using AVB, you can connect your StudioLive 16R to a Series III front-of-house console with one lightweight CAT5e or CAT6 Ethernet cable, eliminating the need for a heavy, expensive copper snake - and the signal degradation that goes with long analogue cable runs. You can even remote control the StudioLive 16R’s preamps and phantom power from your networked Series III console. In stage box + monitor mixer mode, the StudioLive 16R not only serves as an excellent networked stage box, it is a full-blown monitor mixer with far more processing and mixing power than any mixer in its class - all packed into just one rack space. (1U).
Features:
Local Inputs and Outputs
18 total inputs
16 mic/line channel inputs + 2 RCA inputs
6 ¼-inch TRS FlexMix outputs
2 XLR (L/R) Main outputs
Stereo headphone output
Channels and Buses
16 input channels
1 stereo digital return (SD Card, AVB, or USB)
10 buses:
6 FlexMixes (can be designated as aux, subgroup, or matrix mixes)
2 internal effects sends
Stereo main bus
6 Filter DCAs for easily and flexibly controlling groups of channels
Networking Connections
1 Ethernet control network port
Dynamic, Self Assigned, and Manual IP address modes
1 Ethercon AVB audio network port
Recording
Onboard stereo SD recorder
18x18 USB recording interface
32x32 AVB recording interface
Signal Processing
Intuitive Fat Channel signal processing on every channel with:
A/B settings comparison
Highpass filter and polarity reverse
Gate/expander with sidechain
Compressor with sidechain
4-band parametric EQ on inputs
6-band parametric EQ on outputs
Limiter
Delay on every input
Delay on every output
Professionally programmed library of presets
Vintage EQ and compressor models available on every input
Passive EQ
Vintage EQ
Tube compressor
FET compressor
8 31-band graphic EQs
2 internal effects buses: combination of reverbs and delays with modern and vintage options
Built-in real-time analyzer
Scenes and Presets
Create, save, and edit up to 100 scenes
Scene management with:
Scene Safe—prevents a scene change from affecting designated “safe” channels
Create, save, and edit channel settings and copy/paste between channels
Advanced channel preset options can save and recall: