Free field frequency response ±6 dB: 30 Hz … 22 kHz
Free field frequency response ±3 dB: 34 Hz … 21 kHz
Free field frequency linearity deviation between 100 Hz and 10 kHz: ± 1.1 dB
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced: ±0.87; ±0.39; ±0.23 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space: 95 dB SPL (>85 Hz)
SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 116.3 dB SPL
SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 110.3 dB SPL
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz):8 dB SPL
short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 113 dB(C) SPL
short term SPL with music material at 2.3 m in typical listening conditions (pair / full range): 100 dB(C) SPL
short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 107 dB(C) SPL
long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 93 / 99 dB(C) SPL
long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer): 94 / 100 dB(C) SPL
Analog input(s): XLR: analogue electronically balanced
Analog input impedance: >13k Ohms
input level: +24 dBu
Common mode rejection ratio (CMRR): >56 dB @ 15kHz
Input gain control (sensitivity): 0 dB ... -15 dB
Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
Controller design: Analog; active
Crossover frequency: 650 Hz and 2.0 kHz
Crossover slope: 24 dB/oct; 4th order
Equalization: Bass: 0; -2.5; -5; -7.5 dB
Equalization: Low-Mid: 0; -1.5; -3; -4.5 dB
Equalization: Treble: +1; 0; -1; -2 dB
Protection circuitry: Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters. Amplifier overheat.
Infrasonic filter: frequency; slope: 15 Hz; 6 dB/oct.
Display: On; Normal Operation: Neumann logo “White”
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Neumann logo “Red”
Display Brightness: White: 100%/60%/30%/off; Red: 100%/60%/30%
Output power woofer amplifier (THD+N with limiter deactivated: 10%): 210 W
Output power midrange amplifier (THD+N with limiter deactivated: 10%): 90 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%): 90 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%): 150 W
Output power midrange amplifier (THD+N with limiter deactivated: 0.1%): 70 W
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%): 70 W
Mains Power Supply: input voltage; frequency: 100-240V; 50/60 Hz
Power consumption (230 V / 100 V): Idle: 24 W
Power consumption (230 V / 100 V): Full output: 300 W
Cabinet material: Polyurethane front, wooden sleeve, aluminium electronics panel
Cabinet surface finish; colour (front / back): Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions: +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions: -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer: 210 mm (8 1/4") magnetically shielded
Midrange: 75 mm (3") with magnetic shielding
Tweeter: 25 mm (1") with protecting black metal grille
Mounting points: 2 x M8 on side panels; thread depth from outside of cabinet 25 mm (1”); Rear panel screws for attaching LH 41 base plate
Product dimensions (height x width x depth): 253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2")
External net volume: 3 litres
Product weight: 0 kg (28 lbs 11 oz)
Packed dimensions (height x width x depth), mm (inches): 360 x 380 x 590 mm (14 1/8" x 15" x 23 1/4")
Packed weight: 8 kg (37 lbs 1 oz)
Packed cube: 081 m³ |